How to disassemble the water heater of Guangzhou moving company
First, open the package and take out the whole water heater. It's very important to check if there is something wrong with the water heater. If there is, return it. After checking, we will find that there are two hooks at the back of the water heater, which let the water heater hang on the wall.
Measure the distance between the eyes and the top of the wall, and then measure the distance between them. This is very important. If you don't pay attention to it, it will cause the water heater to hang askew or not.
After the drawing is finished, we can start drilling. Basically, some of the water heaters have expansion screws. If they don't, you need to buy them. It's better to buy larger ones, which will be more solid. Besides, the expansion screw head of the water heater has hooks. Don't buy it wrong.
After drilling, the expansion screw should be knocked in with a hammer, so as to make the expansion screw more firm. Then use a pair of pliers or a wrench to tighten the expansion screw, so that his head is up, so that the water heater can hang up.
Then lift up the water heater. The tubular water heater is relatively heavy. It is recommended that two people lift the water heater so that it is convenient to hang it. Then, align the hook at the back of the water heater with the expansion screw and hang it up. In this way, the water heater is fixed.
After the water heater is fixed, then connect the water inlet and outlet. Here, buyers need to buy 40 wide hose, and then connect the water outlet of the water heater to the water inlet of the water heater, and then plug in the power supply to heat it.